Objective:

The objective is to check the pipelines for operating & occasional loads. The piping network is then designed, that can withstand these loads & forces. The purpose of the analysis is to determine the stresses, deflection & forces in pipelines in design as well as operating conditions. Based on results, various design modifications like flexible connectors, rigid anchors, additional supports, spring hangers, etc. Stress analysis is conducted to come up with innovative design solutions that meet international codes like IBC, UBC, BS, ASME, FEMA, and API. The design of structural steel supports for piping systems is design using BS 5950 & ASCE.

Modeling & Analysis:

The 3D modeling for the entire pipeline network with all the bends and runs along with initial support locations is captured and modeled using pipe stress analysis software BentleyAutoPIPE. The piping system is appropriately modeled accounting for their loss coefficient and elevation. The analysis shows the displacement for the pipes at different locations and also the stresses caused due to operating & occasional loads. Various combinations of loading on the pipeline are provided as per applicable standards, which includes:

1. Dead load

2. Pressure Load

3. Thermal Load

4. Seismic loads

Outputs:

• The stress ratio for the different load combinations.

• Forces & Moments acting on each support in all 3 directions.

• Stress Isometrics for Piping network.

• Structural steel support for the Piping system to sustain various loads.

• Design modifications like additional supports & their types, if required in the piping network, to reduce the stresses.

Selected List of Similar Projects:

• Doha Festival City.

• Muscat, Salalah & Delhi International Airports.

• Maliha Hospital, Dubai.

Also read: Why Do You Need Pipe Stress Analysis Consultants?